Making a cardboard standee is an easy and affordable way to promote your business or event. These cutouts are perfect for trade shows, conventions, and other promotional events. In this tutorial, we will show you how to make a cardboard standee using simple tools and supplies. Let’s get started!
How to make your own standees?
There are a few things you need before you start: cardboard, scissors, tape, and a printer. You also need a standee design. You can either find one online or make your own.
Once you have all of your materials, follow these steps:
- Cut out the standee design from the cardboard. Make sure to cut out any small details carefully.
- Tape the standee design to the front of the cardboard. Make sure that it is straight and that there are no gaps.
- Cut out a rectangle from the back of the cardboard. This will be your opening.
- Tape the edges of the opening so that it doesn’t fray.
- Slip your standee over the top of the opening.
Now that you know how to make a cardboard standee, try making one yourself! They make great decorations for parties and events. With a little bit of effort, you can create a truly unique and eye-catching display. So get creative and have fun!
How to make a Cardboard cutout?
- A large piece of cardboard
- A box cutter or scissors
First, decide how tall you want your standee to be. Cut a piece of cardboard that is twice as tall as your desired height, plus two inches. For example, if you want your standee to be four feet tall, cut a piece of cardboard that is ten feet long.
Next, use a pencil and ruler to draw a line down the center of the cardboard. This will be your fold line.
Now, cut two slits in the top of the cardboard, about one inch from the fold line and three inches apart. These slits will be used to insert the standee’s arms.
Next, cut two more slits in the bottom of the cardboard, about four inches from the fold line and six inches apart. These slits will be used to insert the standee’s legs.
Now, fold the cardboard along the center line and tape it together.
Finally, insert the standee’s arms and legs into the slits at the top and bottom of the cardboard cutout. Your standee is now complete!
How to make a paper standee?
You will need:
- A sheet of cardboard
- A pencil
- A ruler or a straight edge
- Scissors or a cutting knife
First, measure out the dimensions of your standee on the cardboard. Mark the measurements with a pencil, then use a ruler or straight edge to connect the marks and create a rectangle. Cut out the rectangle with scissors or a cutting knife.
Next, fold along the two shorter sides of the cardboard so that they meet in the middle. Once you have done this, your standee should be able to stand on its own.
Decorate your standee however you like! You can use paint, markers, crayons, stickers, or anything else you can think of. Let your creativity shine!
How to make a stand for a paper cutout?
- Cut out a piece of cardboard that is about the same height as the paper cutout.
- Fold the cardboard in half so that it stands up on its own.
- Glue or tape the paper cutout to the front of the cardboard standup.
You can make a simple stand for your paper cutout by cutting out a piece of cardboard and folding it in half. Then, glue or tape the paper cutout to the front of the cardboard standup. This will allow your paper cutout to stand on its own, making it perfect for displaying in your home or office!
If you want to get more creative with your cardboard standee, you can try decorating it with paint, markers, or even glitter! Just be sure to let the glue or tape dry completely before you start decorating, so that your design will be securely attached. Once you’re finished decorating, display your standee proudly for all to see!
How to make a mini standee?
- A printer
- Tape or glue
- Scissors or a knife
Print out your chosen design on thin cardboard. If you want a sturdier standee, you can print your design on cardstock. Cut out your design, being careful to follow the lines as closely as possible.
Tape or glue your design onto a piece of thicker cardboard. This will be the back of your standee. Cut out your design again, this time cutting through both layers of cardboard.
Fold along the dotted or cut lines to create your standee. If needed, use additional tape or glue to secure the standee. Place your standee in a desired location and enjoy! You can also use mini standees as party favors or placeholders. Simply write each guest’s name on the back of their standee before assembly.
Making a cardboard standee is a fun and easy project that anyone can do. With a few simple supplies and some creativity, you can create a unique and personalized decoration for your home or office. Give it a try today!
How to make a plywood cutout stand up?
You will need:
- Plywood or cardboard that is at least 30 inches by 40 inches
- A saw
- A drill
- A screwdriver or a power drill
- Screws (optional)
Standees are a fun way to add decoration to any room and they are especially popular among kids. But what if you don’t want to spend the money on a pre-made standee? You can easily make your own out of plywood or cardboard.
To start, you will need to cut out the shape of the standee from plywood or cardboard. If you are using plywood, it is best to use a jigsaw. If you are using cardboard, a sharp knife will work fine.
Once the shape is cut out, drill two holes near the top of the standee. These holes should be about an inch apart.
Next, screw in two screws into the holes. Make sure that the screws are long enough to go through the plywood or cardboard and into the wall.
Now your standee is ready to hang! You can use Command strips or nails to hang it up. Or, if you want to be able to move the standee around, you can use velcro. Just attach velcro dots to the back of the standee and to the wall. Then, when you want to move the standee, simply peel off the velcro dots and stick them back in a new location.
Making your own standee is a quick and easy project that anyone can do. So get creative and have fun!
How to make a celebrity Cardboard cutout?
Do you want to make a cardboard cutout of your favorite celebrity? It’s actually quite easy! All you need is some cardboard, a sharp knife, and a bit of patience. Here’s how to do it:
First, find a picture of the celebrity you want to make a standee of. It’s best if you can find a high-quality photo that’s front-facing and in good lighting. Print the photo out on regular printer paper.
Next, use a sharp knife to cut out the outline of the celebrity’s head and shoulders. Be careful not to cut yourself!
Once you’ve cut out the basic shape, begin cutting away any excess paper. You want the standee to be as thin as possible, so that it’s easy to carry around.
Now, take your cardboard and cut out a rectangle that’s slightly larger than the paper cutout. Use clear tape to attach the paper cutout to the cardboard, making sure that there are no wrinkles or bubbles.
How to make a lemonade stand out of Cardboard?
If you’re looking for a fun and easy summer project, why not try making a lemonade stand out of cardboard? It’s a great way to get the kids involved in some DIY, and you can even decorate it however you like.
Here’s what you’ll need:
- A large piece of cardboard (you can get this from your local hardware store)
- A sharp knife or box cutter
- Some strong tape (we recommend duct tape)
- A few sheets of paper
- Some paint or markers (optional)
First, use the knife or box cutter to cut out a large rectangle from the piece of cardboard. This will be the main panel of your lemonade stand.
Next, use the paper and tape to create a smaller rectangle on one end of the main panel. This will be the door of your stand.
Now, decorate the stand however you like! You can paint it, or add some fun stickers or markers.
Finally, cut out a small rectangle from the top of the stand. This will be the window, where customers can place their orders.
And that’s it! Your cardboard lemonade stand is now complete. Just add some lemons and sugar, and you’re ready to start serving up refreshing drinks all summer long. Thanks for reading!
How to make a prop for a Cardboard door?
You will need:
- A piece of cardboard
- A sharp knife
- A pen or pencil
First, use the Sharpie to draw a door on the piece of cardboard. Make sure that the door is big enough for your head to fit through. Cut out the door with the knife.
Next, take the pen or pencil and draw a knob on the door. Make a small hole in the center of the knob.
Now, cut two pieces of string or yarn that are about two feet long each. Tape one end of each string to the back of the cardboard door, on either side of the door knob.
Your prop is now complete! To use it, simply put it over your head and wear it like a necklace. The strings will keep the door in place.
Have fun! And be sure to share photos of your cardboard standees in the comments below! We can’t wait to see what you create!
How to make a paper character stand?
You will need:
- Scissors or a box cutter
- Exacto knife (optional)
- Pencil or pen
- Ruler or measuring tape
First, you’ll need to make a template for your standee. You can do this by either finding a pre-made template online or by making your own. If you make your own, trace the outline of a character onto cardboard and then cut it out. Once you have your template, use it to trace and cut out as many standees as you want from additional pieces of cardboard.
Now that you have all your standees cut out, it’s time to start assembling them. Begin by taping two standees back-to-back. Then, tape the standees to a piece of cardboard that will serve as the base. Once all your standees are attached, you can decorate them however you want!
How to make Cardboard cutouts with Cricut?
Cardboard cutouts are a great way to add dimension and interest to your Cricut projects. Here’s how to make them:
First, gather your supplies. You’ll need a piece of cardboard, a sharp knife, and a cutting mat. If you want to add details or embellishments to your standee, you’ll also need some craft supplies like paints, markers, or stickers.
Next, use your cutting mat to trace the outline of your standee onto the cardboard. Cut out the shape with a sharp knife, being careful not to cut yourself.
Now you can decorate your standee however you like! Use paint, markers, or stickers to add details and make it your own.
When you’re finished, your standee is ready to display. Place it on a shelf, desk, or table for all to see. Enjoy!
How to make a paper easel?
Paper easels are a cheap and easy way to display your artwork or photos. You can make them out of any type of paper, but cardstock is the best option because it’s sturdier than regular paper.
To make a paper easel, start by folding a piece of paper in half lengthwise. Then, fold it in half again so that it’s only as wide as a single sheet of paper. Next, fold the top and bottom edges of the paper towards the center so that they meet in the middle. Finally, fold the paper in half one last time and crease all of the folds well.
Your paper easel is now ready to use! To display artwork or photos, simply open up the easel and prop it up on a table or shelf. You can also use paper easels to hold placecards at parties or events. Enjoy!
How to stand up a picture prop?
You will need:
- A piece of cardboard (at least 18″ by 24″)
- A sharp knife or box cutter
- A pen or pencil
- Tape (optional)
With your pen or pencil, trace the outline of the object you want to make into a standee onto the cardboard. If you are making a standee of a person, make sure to add an extra few inches on either side for stability.
If you want, you can reinforce the standee by taping the edges. This is especially important if your standee is large or top-heavy.
Now, find a spot to display your new cardboard creation! Enjoy your handiwork and be sure to take plenty of pictures.
That’s it! You now know how to make a cardboard standee. With a little bit of time and effort, you can create impressive props for parties, events, or just for fun. So get out there and start standee-ing!
How to make Christmas yard art?
Christmas yard art is a great way to decorate your home for the holidays. There are many different ways to make it, but one of the most popular is by using cardboard standees. Here are some tips on how to make your own cardboard standee:
- First, you will need to find a design that you like. You can either create your own or find one online.
- Next, you will need to print out the design onto cardstock paper. Make sure that the design is mirror imaged so that it will be facing the correct way when you cut it out.
- Then, use a sharp knife to cut out the design. Be careful not to cut yourself!
- Once the design is cut out, tape it to the front of a piece of cardboard. Make sure that the design is centered and that there is no gap between the cardboard and the design.
- Finally, use a stapler or hot glue to attach the back of the cardboard standee to a piece of wood or metal. This will help it stand up straight.
And that’s it! Your very own cardboard standee is now complete. You can use it to decorate your yard, home, or office for Christmas. Merry Christmas!
How to fold a standee?
To make your own cardboard standee, you’ll need: A large piece of cardboard, a box cutter or utility knife, scissors, duct tape, and something to use as a template (we recommend using a poster or printout).
Here’s how to do it:
- Start by cutting out two large rectangles from your piece of cardboard. These will be the sides of your standee.
- Next, use your box cutter or utility knife to make a hole in the center of each rectangle, big enough to fit your head through.
- Now, take your scissors and cut out a smaller rectangle from each of the larger rectangles. These will be the windows of your standee.
Once you have all of your pieces cut out, it’s time to start assemble your standee. Place the two large rectangles side-by-side and tape them together at the edges. Then, tape the smaller rectangles over the holes in the center of each large rectangle.
Finally, decorate your standee however you like! We recommend using posters, printouts, or even wrapping paper.
And that’s it! Your very own cardboard standee is now complete. Enjoy!
How to print a life size cutout?
Making a life size cut out of your favorite celebrity is easier than you might think. With some creative cardboard cutting and a little help from an online print shop, you can have your very own lifesize cutout in no time. Here’s how:
First, find a high-quality image of the celebrity you want to turn into a cutout. The better the quality of the image, the better your final product will look. Once you have your image, head over to an online print shop like Printmoz.com. At Printmoz, we can print your image onto a large piece of cardboard that’s easy to assemble into a freestanding cutout.
When ordering your cutout, be sure to select the “Life Size” option. This will ensure that your image is printed at the correct size. Once you’ve placed your order, all you need to do is assemble your cutout following the included instructions. In just a few minutes, you’ll have a realistic lifesize cutout of your favorite celebrity!
If you’re looking for a fun and unique way to decorate your home or office, look no further than a lifesize cardboard cutout from Printmoz.com. Ordering is easy and our team of experts are always available to answer any questions you might have. So what are you waiting for? Get started today!
Can we make Cardboard at home?
Yes, you can make a Cardboard standee at home with some simple materials and tools. Here’s what you’ll need:
- Cardboard box
- Scissors or X-ACTO knife
- Poster or printout of your desired image
First, cut the top off of the cardboard box. Then, cut a hole in the center of the box big enough for your head to fit through. Next, tape the poster or printout to the front of the box. Finally, put the box over your head and enjoy your new standee!
Environmental Protection & Energy Saving
Standees are made of cardboard, which is a sustainable and recyclable material. They are also easy to disassemble and store for future use. Cardboard standees are an excellent choice for eco-conscious businesses or individuals.
Another advantage of cardboard standees is that they are very light-weight. This makes them easy to transport from one location to another. They are also easy to set up and take down, which makes them ideal for temporary displays or events.
Cardboard standees are a cost-effective way to create a professional-looking display. They can be printed with high-quality graphics and text, and they are available in a variety of sizes and shapes.
If you are looking for a way to create a unique and eye-catching display, cardboard standees are a great option. With a little creativity, you can use them to promote your business, product, or event in a fun and engaging way. Thanks for reading! We hope this article has been helpful. If you have any questions, please feel free to contact us. We would be happy to assist you further.
Please note that this blog post is for informational purposes only. It is not intended to be used as medical or professional advice. If you have any questions or concerns, please consult with your doctor or a qualified health care professional. Thanks for reading!
- Be sure to use sturdy cardboard so your standee doesn’t collapse.
- If you are going to be displaying your standee outdoors, be sure to weatherproof it with a clear sealant or laminate.
- Be careful when handling sharp objects such as scissors or knives.
- Keep flammable materials away from candles, fireplaces, and other heat sources.
We hope you found these tips helpful! If you have any questions, please feel free to contact us. We would be happy to assist you further. Thanks for reading!
How long does it take to make a standee?
It takes about an hour to make a standee.
What do I need to make a standee?
To make a standee, you will need cardboard, scissors, and tape.
How much does it cost to make a standee?
It costs about $20 to make a standee.
How big is a standee?
Standees are usually about six feet tall.
Cardboard standees are a great way to add a personal touch to your home or office. They are also relatively easy and inexpensive to make. With a little creativity, you can create a standee that is both unique and eye-catching.
If you’re looking for a fun project to do with your kids, making cardboard standees is a great option. Not only will they have a blast creating their own designs, but they’ll also be proud to see their handiwork on display.
- 1 How to make your own standees?
- 2 How to make a Cardboard cutout?
- 3 How to make a paper standee?
- 4 How to make a stand for a paper cutout?
- 5 How to make a plywood cutout stand up?
- 6 How to make a celebrity Cardboard cutout?
- 7 How to make a lemonade stand out of Cardboard?
- 8 How to make a prop for a Cardboard door?
- 9 How to make a paper character stand?
- 10 How to make Cardboard cutouts with Cricut?
- 11 How to make a paper easel?
- 12 How to stand up a picture prop?
- 13 How to make Christmas yard art?
- 14 How to fold a standee?
- 15 How to print a life size cutout?
- 16 Can we make Cardboard at home?
- 17 Environmental Protection & Energy Saving
- 18 FAQs
- 19 Conclusion